Zander Circuitry Avalanche


The harmonic clipping trifecta.

Tired of needing several pedals to cover all of your gain stages? Do you do a lot of travelling for gigs and want a more compact solution? The Avalanche can help you out…

The Avalanche consists of 3 completely separate channels that can be used independently or stacked, including the toggle switches this gives you  more than 50 different possible combinations of boost, drive & fuzz.

Channel 1 – Crunch
This is a low-to-mid gain drive with a punchy midrange, perfect for taking your guitar from a sparkly clean signal into a hard hitting rock sound reminiscent of a cranked tweed amplifier. The Bright toggle works brilliantly for taming the brightness of some single coil guitars, the center position is the brighest, up/down offer different levels of treble cut.

Channel 2 – Drive
This channel has a bit more gain and a flatter frequency response, great for heavier riffing and drop tunings, combining it with channel one is great for heavily saturated tones without things getting “flubby” in the bass frequencies.

With both channel 1 & 2 you can use the Clip 1 and Clip 2 switches to go between germanium diodes, no diodes or silicon diodes, the no diode mode will turn either effect into more of a dirty boost, perfect if you’re running an amp that is already breaking up.

Channel 3 – Fuzz
A well balanced, high gain fuzz that is great for beefy stoner-rock style riffs with the Fat switch engaged (center position is the “thinnest”, up/down offer different levels of bass boost), or as a perfect solo tone with it off as it allows more mid-range to push through. Combining this with one or even both of the drive channels takes you into super-saturated, feedback-inducing fuzz territory, use at your own risk!

Controls – Level (Crunch), Level (Drive), Level (Fuzz)
Switches – Engage (bypass), Clip 1, Clip 2, Dark, Fat
Jacks – Top mounted in/out jacks
Power requirement – 9v DC Center Negative PSU
Current Draw – 15ma (approx)

Please do not try to power this pedal with anything other than 9v, doing so will cause your shiny new pedal to stop working permanently, and no one wants that.

Please click to check out the new line of Eastwood Guitars

We are very picky about the product lines we carry here.  They must have great tone, stellar reliability and the right vibe.  Thus far, We are very impressed by all of the manufacturers we deal with .  In addition, the manufacturers we carry all have one big thing in common:  They are all Super-creative People that are fun and easy to deal with!